Ebb And Flow Grow Table is made of ABS, an environmentally friendly plastic. This ebb flow grow table uses hot-dip galvanized columns and supports, and the bed surface uses molded impermeable plastic seedling trays. When irrigating, the seedling tray is filled with clean water or nutrient solution and allowed to remain for a certain period of time so that the crops can absorb water through the drainage holes at the bottom of the flower pot by capillary action. After that, the irrigation water is discharged from the cultivation bed, or collected for reuse, or directly discharged to the local sewer pipe.
1. Water-saving and efficient, completely closed system circulation, up to 90% utilization rate.
2. Plants grow faster, the weekly seedling age can be one day earlier than the traditional seedling method, improving the utilization rate of facilities.
3. Avoid the formation of water film on the plant leaf surface, so that the leaves receive more photosynthesis, prompting the transpiration pull to absorb more nutrients from the roots;
4 Stable root medium moisture content to prevent the capillary roots from dying due to drought near the bottom of the container edge.
5 Relative humidity is easy to control, keep the leaf surface dry, and reduce the use of chemical drugs.
6. No weeds grow under the planting bed, reducing fungal growth.
7. Management costs are reduced, whether it is manual operation or assisted by microcomputer controller management to complete quickly
8. Can be used at any time, not limited by variety, specification, and time
9. The general sprinkler irrigation method makes each plant absorb fertilizer and water unevenly, the cost rate is reduced, and the tidal irrigation yield rate is higher
Specifications
| Product Name |
Ebb and flow rolling benches |
| Standard Size |
2ft / 3ft / 4ft / 5ft / 6ft width with any length |
| Standarder Height |
About 70cm , height adjustable 8-10cm (can be customized) |
| Rolling Distance |
30-60cm each side |
| Product Material |
Food grade ABS tray , hot dip galvanized table |
| UV Protection |
Yes |
| Load Capacity |
70-90 KGS/SQM |
Hydroponics is the way to go for those who want to get the most yield out of their light and area. Hydroponics
will provide bushier plants and faster growth. The Ebb and Flow complete growsystem floods the roots with a
nutrient solution. Ebb and Flow complete grow systems have been proven to be extremely effective over time
and require very low maintenance and are easy-to-use.
Detailed Image:
Advantages:
1. It can move left and right (movable 0.6m), and the height can be fine-adjusted (adjustable by 10 cm);
2. Anti-turning limit equipment to prevent skew caused by emphasis;
3. The maximum load capacity is 50kg/㎡;
4. Full hot-dip galvanizing process, durable;
5. The life span can reach 15-20 years;
6. Reduce irrigation waste, recycle and reuse;
7. Easy to install;
8. The system structure is reasonable;
9. Less maintenance;
10. High ground utilization rate
Working Principle:
Hydroponic ebb and flow trays uses pumps and a large water reservoir to periodically flood the plant
roots with nutrients and water. An easy method is using a large plastic tote to contain the nutrient solution
with the plants sitting in a deep tray on top of the lid. The nutrient solution is pumped into the tray from
the reservoir below, and then is allowed to drain back into the reservoir.
Main Features
1.Labor savings and cost effective
2.The factory manufacture compleste ebb and flow system in china.
3.An entire acre or more can be watered automatically and efficiently
4. Plants are watered evenly, reducing losses due to poor watering practices
5. Plants can be fertilized as they are being watered
6.Floors are dry, avoiding accidents
7.Compatible with many computer control systems
Welcome to contact us!
Your message must be between 20-3,000 characters!
